What are the seven repair tips for office table and chair maintenance?

1. After the furniture surface is made up of the drum decorative veneer, you can use a sharp blade to cut a knife in the middle of the bubble in the direction of the wood grain, then use a syringe to inject the glue into the seam and gently press it on the upper part of the bubble with your finger. The spilled glue is rinsed with a damp cloth and pressed with a weight that is smoother on the bottom surface and larger than the bubble area.

2. Repair the paint surface If the furniture paint surface is burnt and damaged, you can put a fine cloth on the toothpick, gently wipe the traces, and then apply a thin layer of wax, the scorch marks can be removed.

3. Eliminate water marks on the furniture, if not immediately dry, will leave traces of water stains. In this case, the wet cloth can be used to cover the traces, and then the wet cloth is carefully pressed several times with an electric iron, and the trace moisture will evaporate with heat, and the water mark can be eliminated.

4. Remove old paint If you want to remove the paint from the furniture, you can remove the old paint by applying the failed developer to the paint surface of the furniture.

5. Repairing the dent Some furniture is soft due to the wood and will leave a dent after the collision. At this time, you can use a wet towel to place it in the depression, and then iron it with an iron to restore it.

6. Furniture rust chrome furniture is rusty, do not use sandpaper to polish. Small plating parts can be placed in a pot of organic oil for 8 to 10 hours, and rubbed with a cloth.

7. Repair cracked solid wood furniture, such as cracks due to heat and cold shrinkage, the following remedies can be used; burn the old cotton cloth or broken sack into ash, then stir it with raw tung oil into a paste, embedded in the crack of the wood, after drying It can be filled and stuck.